OSRAM LIGHTsignal beacon - 360 ° warning, brilliant amber, truck-approved flashing signal

Halogen lamp with 360 ° rotation: better visibility and therefore more safety for you and for others
Optimal light emission and distribution thanks to the rotating unit consisting of a highly reflective dish, reflector with H1 halogen lamp
Bright amber emergency lighting, up to 1900 lumens and up to 2200 Kelvin
24V compatible, protection class IP65. Mounting type: fixing with 3 screws
Shatterproof polycarbonate housing, maximum vibration resistance and fully rubberized shock-absorbing base
OSRAM LIGHT beacon HALOGEN BEACON LIGHT signal - 360 ° warning, shiny amber, flashing signal approved for trucks and utility vehicles with 3-screw fixing

Light is safety - See and be seen with OSRAM

OSRAM's HAL BEACON LIGHTsignal is a yellow 360 ° rotating beacon that can be mounted on vehicles of unusual width, length or load, as well as municipal vehicles, emergency vehicles, command and rescue in the event of an accident to draw attention to an unusual situation on the road or in the working environment. The OSRAM beacon can be used for better visual recognition, marking and securing of hazardous areas or special locations. In addition, rotating beacons are used in certain installations, on machines and devices as well as in alarm systems. The OSRAM beacon is characterized by high efficiency thanks to a high-quality H1 halogen lamp with up to 1900 lumens and 2200 Kelvin and thus ensures better visibility and therefore increased safety for you and others - day and night. night. Thanks to its non-slip and shock-absorbing rubber base, the OSRAM traffic light is particularly resistant to vibrations. At the same time, the fully rubberized base helps to ensure the seal between the product and the basement. To reduce and prevent dirt build-up on the beacon, the OSRAM LIGHTsignal HAL uses a smooth surface on the housing, thus preventing the signal effect from being altered by dirt. The OSRAM LIGHTsignal HAL convinces with its high brightness. Thanks to a special texture inside the housing and the highly polished parabolic reflector, an efficient and effective light output is generated. The light is suitable for 24V vehicles and thanks to its robust and functional design, the light offers different application possibilities and great flexibility. The mounting material included in the delivery allows direct and precise mounting and therefore immediate use of the beacons. The three-point mounting system allows the light to be securely and securely attached to the roof of the vehicle. In addition, the OSRAM LIGHTsignal HAL beacon light complies with ECE R10 and R65 directives and is therefore approved for use in road traffic1) The OSRAM LIGHTsignal has been tested in our DIN EN ISO / IEC certified environmental simulation laboratory. 17025 for extreme external influences in terms of water, dust, heat and cold and has been validated with protection class IP65. OSRAM grants 2 years warranty on this product2)
.Special regulations apply regarding the use and application of rotating beacons. This is governed by the respective and country-specific road traffic permit regulations.

Technical data

Product information

Application (Category and specific product)

Warning and safety lights

Country specific rankings

Order reference

RBL101

Electrical data

Nominal voltage

24.0 V

Nominal power

70.00 W

Photometric data

Temp. colored

2200 K

LED color

amber

Dimensions & weight

Length

150.0 mm

Height

193.0 mm

Product weight

653.00 g

Lifetime

Guarantee

2 years

Capabilities

Technology

Halogen

Certificates & Standards

Type of protection

IP65

Environmental information

Date of Declaration

03-12-2021

Primary Article Identifier

4062172192828

Candidate List Substance 1

No declarable substances contained

CAS No. of substance 1

CAS #

Declaration No. in SCIP database

No declarable substances contained